2021-03-25_10h39_15.png

Our Products

Below is our standard X-treme PRO wide-format substrate tape application machine, 200mm applicator with 3 rolls of aluminum tape, and 2-axis cartesian solution sporting our 200mm applicator with a single wide tape roll.

123321.PNG

X-TREME LIGHT 700
AND X-TREME LIGHT 1000

Small/medium formats - two models for formats up to
700mm (28”) or 1000mm (40”) wide up to 10mm (3/8”)
thick. 2 to 4 25mm (1”) or 50mm (2”) tape applicators
independently programmed on a touchscreen applying
multiple differently configured strips in one pass.
Apply tapes at speeds up to 35m (115’)/min
Print, point of sale, packaging, plastics, signage
applications.

Enimac-XT-light1263.png
XT-PRO-e-commerce2086.png

X-Treme Pro E Commerce

With a maximum width of 1600mmm It easily accommodates the largest formats of offset printing and many formats of Digital Printing. 

With up to 6 independently programmable patented “paste and cut” applicators. It can cut tape up to 2mm thick. 

This particular machine is set up with a Dual Tape Drum and De-spooler to accommodate Tear Strip for Easy Opening And Double Sided Tape for Easy Closing

Biemme Ottobre 20200219 copia.jpg

X-TREME PRO 1600

Large format - up to 1600mm (63”) wide and 15mm
(just under 5/8”) thick.
2 to 6 30mm (1.2”) or 60mm (2,4”) tape applicators
independently programmed on a touchscreen applying
multiple differently configured strips in one pass.
Apply tapes at speeds up to 50m (164’)/min.
Large (and small) format print, point of sale, packaging,
plastics, signage applications.

APPLICABLE TAPES
Some tapes are easier to automate than others, but whether your project requires applying a mono-sided masking tape, a transfer tape, a double-sided modified acrylic adhesive with PET carrier and paper liner, a double-sided polyethylene foam tape with modified acrylate adhesive and paper liner, or a double-sided tackified acrylic adhesive with PET carrier and a red MOPP-film liner or many others, our applicators are designed to apply many types of tape, and we are continuing to expand our capabilities.

1234.PNG

APPLICATORS FOR INTEGRATION

Typical information necessary for an integration project are the form of the substrate, the type and dimensions of tape to be applied, the speed at which the tape will be applied and the communication protocol necessary for integration. We work together with the client to analyse the application requirements and provide or develop the appropriate applicator to integrate.

2345.PNG
44444.PNG

APPLICATION PATTERNS


A single strip, two parallel strips close together, 3-4-5 or 6 parallel strips overthe entire width of the substrate or several consecutive strips spaced out down the length of a die-cut substrate. We have, or can develop, a solution for any pattern you require.

Our standard machines are used for various product formats: posters, envelopes, pocket folders, packaging, wobblers and free-standing display units. Applying tape on one side, both sides, and all the way around the product but also applying several shorter consecutive strips (so-called “spots” of tape), putting the right amount of tape where it’s needed.

33333.PNG
Find out more information or have a custom request contact us below
arrow&v

Thanks for submitting!